TwinPower Turbine

  • TwinPower Turbine
  • Reviews
  • Product Line
  • Technology
  • Connections
  • Ordering Info
  • Maintenance
  • IFU/MSDS

Air Driven, High Speed Handpieces

The TwinPower Turbine® product line features the world's only "twin turbines." This unique design delivers superior cutting power even under high load conditions. For superior infection control, TwinPower is the ONLY high speed handpiece equipped with a pressurized air system which prevents the intake of contaminated aerosol and other particles into the air line.

NEW! The latest addition to the product line is the TwinPower Turbine 45 Basic. This model is economically priced at just $799 MSRP and comes with a limited time, 30-day money-back guarantee. This handpiece offers several unique features of the original 45° handpiece, above and beyond those in its class.  

TwinPower Turbine models include the following:
Standard Head Very powerful, 22 watts.
Basic Model Economical price point with features above
those in its class.
Ultra Series (Mini) Twice the power of other mini handpieces.

45 degree

Rear exhaust for surgical procedures. 
NEW!  Basic & non-optic models available.


Learn more details under the Product Line tab above.

FEATURES

  • Superior cutting power with unique, double-impeller technology
  • Zero suck back in air line for excellent contamination control
  • Directly compatible with: TwinPower Morita, KaVo® MULTIflex® LUX, Sirona® R/F, W&H® Roto Quick, and NSK® FlexiQuick Coupling (Standard & Ultra Series)
  • Safe, rapid braking within 2 seconds
  • Lightweight: 45-59g 
  • Quiet operation
  • Ceramic bearings
  • Push button chuck
SPECIAL OFFERS (Expires December 31, 2014)
 
Purchase 1 Morita type Ultra Series or 45° Free 4-hole, 5-hole or 6 pin coupler (LED excluded)

Purchase 3 (any type) Free additional handpiece (of equal or lesser value) OR an Air Torx Low Speed Air Motor

Purchase 6
(excludes Basic)
Free Lubrina Handpiece Maintenance System

Purchase 9
(excludes Basic)
Free Lubrina PLUS 4 maintenance couplers
 
   
 
 
   
   
 
 
   
   
 
 
   
   
 
 
   
   
 
 
   
   
 
 
   
   
 
 
   
   
 
 
   
   
 
SPECIAL OFFERS (Expires September 30, 2014)
   
Purchase 1 Morita type Ultra Series or 45° Free 4-hole, 5-hole or 6 pin coupler (LED excluded)
   
Purchase 3 (any type) Free additional handpiece (of equal or lesser value) OR an Air Torx Low Speed Air Motor
   
Purchase 6 (any type) Free Lubrina Handpiece Maintenance System
   
Purchase 9 (any type) Free Lubrina PLUS 4 maintenance couplers

 

Limited Time Offer: 30-day Money Back Guarantee


      

Dr. Martin Goldstein Headshot
“The UltraM changed my opinion of mini handpieces... surprised such a small handpiece cuts like a full sized counterpart.”
--Martin B. Goldstein, DMD





“J. Morita’s new TwinPower Turbine high-speed surgical handpiece is the best I’ve used for endodontic surgical procedures. It has a 45-degree head angle, an exhaust port that diverts air away from the surgical site, a very bright magnetopowered LED light, and a water spray control valve right on the coupler. Those features are great, but the home-run is how quiet and powerful these new Morita turbines are.”

--L. Stephen Buchanan, DDS
Inventor of EndoBender pliers, System-B Heat Source, GT and GTX Files

TwinPower Turbine Standard
The very powerful standard head delivers up 22 watts for smooth, efficient cutting even under high load conditions. It was awarded the 2010 Top Air-Driven, High Speed Handpiece by The Dental Advisor.

TwinPower Standard Specifications
Name TwinPower Turbine® Standard Head
Rotation Speed (rpm) 370,000 ± 30,000
Power (watts) 22
Air/water spray nozzles 3
Head diameter (mm) 10.5
Head height (mm) 13.2
Weight (g) 48-57
Driving air pressure 0.2-0.29 Mpa / 29-42 psi




TwinPower Turbine Basic
The Basic model is offered at just $595 MSRP and comes with a limited time, 30-day money back guarantee. Cutting efficiency remains equal to the standard head with up to 22 watts of high power and torque. Other features include: chrome body, ceramic bearings, zero suck back, rapid braking, and a 4-hole connection.

TwinPower Basic Specifications
Name TwinPower Turbine® Basic
Rotation Speed (rpm) 370,000 ± 30,000
Power (watts) 22
Air/water spray nozzles 3
Head diameter (mm) 10.5
Head height (mm) 13.2
Weight (g) 45
Driving air pressure 0.2-0.29 Mpa / 29-42 psi




TwinPower Turbine UltraM
UltraM delivers 18 watts of power, twice the power of some other popular mini handpieces. It also offers the smallest head of the TwinPower Turbine product line with a height of just 10.6 mm. Due to its very compact size, UltraM offers better access in the posterior region and is more comfortable for patients. It is especially helpful on the occlusal surface when the patient has limited opening.     

TwinPower UltraM Specifications
Name TwinPower Turbine® 4HUMX-O
Chuck type Push-button chuck
Rotation Speed (rpm) 370,000 ± 30,000
Power (watts) 18
Air/water spray nozzles 5 air, 1 water
Head diameter (mm) 9
Head height (mm) 10.6
Weight (g) 48-57
Driving air pressure 0.2-0.29 Mpa / 29-42 psi




TwinPower Turbine UltraE
UltraE is slightly larger and more powerful compared to UltraM. It offers a head height of 12.7 mm and up to 20 watts of power. UltraE facilitates an improved view with a mirror or a microscope. The bur can easily be seen while accessing the pulp chamber. The small head allows for improved mirror positioning and better vision. It accepts any standard-sized bur.     

TwinPower UltraE Specifications
Name TwinPower Turbine® 4HUEX-O
Chuck type Push-button chuck
Rotation Speed (rpm) 370,000 ± 30,000
Power (watts) 20
Air/water spray nozzles 3 water, 3 air
Head diameter (mm) 9
Head height (mm) 12.7
Weight (g) 48-57
Driving air pressure 0.2-0.29 Mpa / 29-42 psi

 

TwinPower Turbine 45
TwinPower Turbine 45 offers maximum access and visibility with a 45° angle and an overall head size smaller than competitive units. It delivers up to 20 watts with rear-facing exhaust vents to direct air flow away from the surgical site for patient protection.

TwinPower 45 Specifications
Name TwinPower Turbine® 45 4HEX-O
Chuck type Push-button chuck
Rotation Speed (rpm) 370,000 ± 30,000
Power (watts) 20
Water ports 3
Head diameter (mm) 10.5
Head height (mm) 13.2
Weight (g) 53-59
Driving air pressure 0.2-0.29 Mpa / 29-42 psi

 


NEW!  TwinPower Turbine 45 Non-Optic

Morita’s 45° TwinPower Turbine handpiece is now offered without optics. For clinicians using loops or a microscope, this model offers a powerful, yet economical option. It delivers up to 20 watts with rear-facing exhaust vents to direct air flow away from the surgical site for patient protection.

TwinPower 45 Non-Optic Specifications
Name TwinPower Turbine® 45 4HEX
Chuck type Push-button chuck
Rotation Speed (rpm) 370,000 ± 30,000
Power (watts) 20
Water ports 3
Head diameter (mm) 10.5
Head height (mm) 13.2
Weight (g) 50-56
Driving air pressure 0.2-0.29 Mpa / 29-42 psi

 

NEW!  TwinPower Turbine 45 Basic

Morita’s 45° TwinPower Turbine handpiece is now offered in a basic model with a 4-hole connection and a chrome body. For clinicians using loops or a microscope, this model offers a powerful, yet economical option. It delivers up to 20 watts with rear-facing exhaust vents to direct air flow away from the surgical site for patient protection.

TwinPower 45 Basic Specifications
Name TwinPower Turbine® 45 4HEX-B
Chuck type Push-button chuck
Rotation Speed (rpm) 370,000 ± 30,000
Power (watts) 20
Water ports 3
Head diameter (mm) 10.5
Head height (mm) 13.2
Weight (g) 45
Driving air pressure 0.2-0.29 Mpa / 29-42 psi


TORQUE RIPPLE CHART

Torque ripple is the ratio of torque fluctuation due to impeller rotation and stall torque.
The smaller this is, the smoother the cutting goes. 

The TwinPower Turbine 45 outperforms the most common 45° degree handpieces.

Measurements made by J. Morita Mfg. Corp. under recommended conditions
by each handpiece manufacturer.

 

Air, which is delivered from three drive air nozzles, powers the primary impeller. The exhaust air is directed through multiple fixed fins to power the second impeller. The operational result is far greater power, control, and precision.

For superior infection control, TwinPower is equipped with a unique zero suck back function (Anti Suck Back Diffuser) that prevents the intake of contaminated aerosol and other particles into the air line - a first for the dental industry. This feature helps eliminate cross contamination of the handpiece, coupling, air line, and treatment unit.

 

CONNECTION OPTIONS

TwinPower is a practical choice – it can be connected to various commonly used couplings. Note: 45° available in Morita & KaVo type only. Basic available in 4-hole only.

 

 

J. Morita TwinPower
(see chart below)
   

KaVo® MULTIflex® LUX*
   

Sirona® R/F*
   

W&H® Roto Quick*
   

NSK® Mach/Phatelus®/ FlexiQuick Coupling**
*KaVo MULTIflex LUX is a registered trademark of Kaltenbach & Voight GmbH. Sirona is a registered trademark of Sirona Dental Systems GmbH. W&H and Roto Quick are registered trademarks of W&H Dental Bürmoos GmbH.

**NSK and Phatelus are registered trademarks of NAKANISHI INC. Name of coupling varies by country.


MORITA TWINPOWER COUPLING OPTIONS
(tubing side)

CP4-LD (with LED light)
6-Pin Connection
Compatible with 6-pin connection
ISO 9168 Type 3 (formerly Type C†)
Non-retractive valve
360° axis rotation

     
CP4-W-LD (with water adjustment & LED light)
6-Pin Connection
Compatible with 6-pin connection
ISO 9168 Type 3 (formerly Type C†)
Non-retractive valve
Water adjustment valve
360° axis rotation
 
     
CP4-O (with light)
6-Pin Connection
Compatible with 6-pin connection
ISO 9168 Type 3 (formerly Type C†)
Non-retractive valve
360° axis rotation
   

CP4-WO (with water adjustment & light)
6-Pin Connection
Compatible with 6-pin connection
ISO 9168 Type 3 (formerly Type C†)
Non-retractive valve
Water adjustment valve
360° axis rotation
   

CP5-O (with optics)
5-Hole Connection
Compatible with 5-hole connection
ISO 9168 Type 2 (formerly Type B†)
Use with standard fiber optic tubing
Non-retractive valve
360° axis rotation
   

CP4 (without light)
4-Hole Connection
Compatible with 4-hole connection
ISO 9168 Type 3 (formerly Type C†)
Non-retractive valve
360° axis rotation
     

† ISO 9168 - Hose connectors for air driven dental handpieces was revised July 1, 2009.
The type designation of handpiece joints was changed from letters to numbers.

Packaging
Handpiece, Lubricant Spray Nozzle, Chuck Grip Tester, and Spray Hole Wire. TwinPower standard and 45 also include a Screwdriver and Cap Tool.

Product Numbers
J. Morita TwinPower Standard Head Handpieces
16-5340888


TwinPower Turbine 4H PAR-4HEX-O
(J. Morita TwinPower Couplings)

16-5340608


TwinPower Turbine 4H PAR-4HEX-O-KV
(KaVo® MULTIflex® LUX*)

16-5340632


TwinPower Turbine 4H PAR-4HEX-O-SR
(Sirona® R/F*)

16-5340624


TwinPower Turbine 4H PAR-4HEX-O-WH
(W&H® Roto Quick*)

16-5340616 TwinPower Turbine 4H PAR-4HEX-O-NK
(NSK® FlexiQuick**)


J. Morita TwinPower Basic Handpiece
16-5360838


TwinPower Turbine 4H PAR-4HEX-B 
(4-hole)

J. Morita TwinPower UltraM Handpieces
16-53556989


TwinPower Turbine PAR-4HUMX-O
(TwinPower Morita)

16-5357578


TwinPower Turbine PAR-4HUMX-O-KV
(KaVo® MULTIflex® LUX*)

16-5357608
TwinPower Turbine PAR-4HUMX-O-SR
(Sirona® R/F* )
16-5357594
TwinPower Turbine PAR-4HUMX-O-WH
(W&H® Roto Quick* )
16-5357586 TwinPower Turbine PAR-4HUMX-O-NK
(NSK® FlexiQuick** )
   
J. Morita TwinPower UltraE Handpieces
16-5356970


TwinPower Turbine PAR-4HUEX-O
(TwinPower Morita)

16-5357497


TwinPower Turbine PAR-4HUEX-O-KV
(KaVo® MULTIflex® LUX*)

16-5357527
TwinPower Turbine PAR-4HUEX-O-SR
(Sirona® R/F* )
16-5357519
TwinPower Turbine PAR-4HUEX-O-WH
(W&H® Roto Quick* )
16-5357500 TwinPower Turbine PAR-4HUEX-O-NK
(NSK® FlexiQuick** )
   
J. Morita TwinPower 45 Head Handpieces

16-5344670

TwinPower Turbine 45, PAR-4HEX-O-45
(Morita)

16-5350522

TwinPower Turbine 45, PAR-4HEX-O-KV-45
(KaVo MULTIflex LUX)
   
J. Morita TwinPower 45 Head Non-Optic Handpieces
16-5361087 TwinPower Turbine 45, PAR-4HEX-45
(Morita)
16-5361079 TwinPower Turbine 45, PAR-4HEX-KV-45
(KaVo MULTIflex LUX)
   
J. Morita TwinPower 45 Head Basic Handpiece
16-5606322 TwinPower Turbine 45, PAR-4HEX-B-45 (4-hole)
   

J. Morita TwinPower Coupling Options

16-5354978


16-5354951


16-5333830

TwinPower 6-pin Coupling CP4-LD
(with LED light)

TwinPower 6-pin Coupling CP4-W-LD
(with water adjustment and LED light)

TwinPower 6-pin Coupling CP4-O
(with light)

16-5339421


TwinPower 6-pin Coupling CP4-WO
(with water adjustment and light)

16-5349214 TwinPower 5-hole Coupling CP5-O
(with optics)
16-5333881 TwinPower 4-hole Coupling CP4
(without light)
   
Accessories  
24-5010212 AR Spray



*KaVo MULTIflex LUX is a registered trademark of Kaltenbach & Voight GmbH. Sirona is a registered trademark of Sirona Dental Systems GmbH. W&H and Roto Quick are registered trademarks of W&H Dental Bürmoos GmbH.

**NSK and Phatelus are registered trademarks of NAKANISHI INC. Name of coupling varies by country.

For regular maintenance and lubrication, it is highly recommended that AR Spray, by J. Morita, be used for TwinPower handpieces. Other lubricants could cause TwinPower to malfunction, make it difficult to connect/disconnect, or adversely affect braking time. Refer to the instructions for use for more details on how to properly care for TwinPower using AR Spray.

 

Maintenance Guides

TwinPower Turbine Standard, Ultra Series and 45° Models

TwinPower Turbine Basic and 45 Basic Models