PerfectIM Systems

  • PerfectIM Systems
  • H & H Technique
  • Selection Chart
  • Ordering Information
  • Articles
  • IFU / MSDS

Vinyl Polysiloxane Impression Material

PerfectIMPerfectIM® Systems offer accurate final impressions of subgingival margins without use of retraction cord, gingival excision or application of hemostatic agents. This two-step vinyl polysiloxane impression system eliminates the time consuming task of packing retraction cord and therefore any possible posttraumatic discomfort. Because these materials are hydrophobic, they will displace fluids. These materials are cartridge dispensed, thixotropic (except for Final Wash and SnoWhite), radiopaque, resistant to fluid absorption, tasteless and odorless. They provide excellent dimensional stability and are immersible in aqueous disinfectants. A range of working/setting times and viscosities are available for any impression procedure.

SPECIAL OFFER (Expires June 30, 2012)
Purchase 5 kits of PerfectIM Systems Impression Materials,
receive 1 kit for FREE.

 

FEATURES

  • Developed specifically for the H & H Technique (Hydraulic/Hydrophobic Impression Technique)
  • Variety of working times and durometers to choose from
  • High durometer eliminates the need for retraction cord
  • Excellent dimensional stability
  • Resists fluid absorption
  • Thixotropic

Indications

  • Direct or indirect inlays, onlays or veneers
  • Full or partial dentures
  • Fabrication of crowns
  • Relining dentures

Downloads

Animations


PERFECTIM SYSTEMS
H & H CORDLESS IMPRESSION TECHNIQUE®

No retraction cord. No hemostasis.


PerfectIM Overview
PerfectIM
Overview Video
 

The H & H Cordless Impression Technique was developed by Dr. Jeffrey Hoos and J. Morita USA. It's known as one of the best revolutionary developments in clinical efficiency! This technique allows you to save an average of 15 minutes per "crown & bridge" appointment while achieving exceptionally accurate results.

Clinical Indications:

  • Crown & bridge impressions without retraction cord and without a dry field
  • Impressions for all other indirect restorations
  • Accurate bite registrations for any situation
  • Full denture impressions
  • Fixed implant impressions


  • The 30 Second Blue Velvet is the same formula as the original Blu-Mousse and has a set time of just 30 seconds. It has a whipped cream texture that is thixotropic, which eliminates running, dripping and gagging. It has been designed specifically for the H & H impression technique and also for bite registrations. It is the ideal material for fast, highly detailed, and extremely accurate interocclusal records. Use the J. Morita impression material gun and 30 second Blue Velvet that leaves you with NO DOUBT ABOUT A BITE®





    H & H Cordless Impression Technique (Hydraulic & Hydrophobic)
    Immediately following a crown preparation, a primary impression is taken with either 30 Second, 90 Second, or Universal Blue Velvet. Then either 30 Second or 90 Second Flexi-Velvet is injected into the impression of the prepped tooth. The FLEXI-VELVET material is hydraulically moved into the sulcus, displacing the gingival tissue and oral fluids. Since the FLEXI-VELVET is hydrophobic, it does not absorb moisture, and sets without distortion. These two occurrences are described as hydraulic and hydrophobic, or the H&H technique, which make it possible to achieve accurate impressions without the use of retraction cord. This technique was developed to improve patient comfort while obtaining accurate results in an efficient manner.

    Flexi-Velvet Impression Images
    Click on image to magnify.


    Image 1. Image 2. Image 3. Image 4.


    SnoWhite Impression Images
    Click on image to magnify.

    Image 1. Image 2. Image 3. Image 4.
    Two-Step Cordless Impression Technique

    Clinical Features of PerfectIM
    • Available in 150 ml auto-mix cartridges
    • Available in different set times that allow for operator technique flexibility
    • Odor and taste free
    • Easy handling properties including mixing, placement in the mouth, and clean-up
    • Working and set times are preset, so operator error is eliminated
    • Can be immersed in aqueous disinfectants without any dimensional change
    • Outstanding physical properties of flow, tear strength, permanent deformation, and flexibility
    • Dimensional stability is excellent, resulting in positive casts that can be poured minutes or days after impression is taken
    • Can be silver or copper plated
    • Never reported to have caused patient sensitivities or an allergic reaction



    Jeffrey C. Hoos, DMD, FAGD
    Private Practice: Stratford, Connecticut
    Phone: (203) 378-9500
    Fax: (203) 386-9057
    E-mail: jchdmd@bettersmile.com

    Packaging
    Kit includes: (3) 50ml cartridges and 12 mixing tips.

    Product Numbers

    21-300500 30 Second Blue Velvet Kit
    21-300550 90 Second Blue Velvet Kit
    21-300625 30 Second Flexi-Velvet Kit
    21-300650 90 Second Flexi-Velvet Kit
    21-300925 30 Second SnoWhite Kit
    21-300950 90 Second SnoWhite Kit
    21-300700 Single Phase Body Kit
    21-300800 Final Wash Kit
    21-300050 Perfectim Putty Type (C & B /400g each)
    21-301100 Perfectim Tissue Mimic (2 cart. /100ml)
    21-300015 Cartridge Dispensing Gun
    21-300044 Mixing Tips Large (12)
    21-300044L Mixing Tips Large (50)
    21-300047 Mixing Tips Small (12)
    21-300047L Mixing Tips Small (50)
    21-300045 Intraoral Tips (100)