Panoramic Scout, Two-direction Scout and 5 positioning laser beams - the Veraviewepocs offers you three options for easy, reliable positioning and selection of the region of interest for 3D images.

Exclusive: Panoramic Scout for images of limited areas

With its MORITA-exclusive Panoramic Scout function, the Veraviewepocs allows you to easily and reliably define and set the right target area for small field CBCTs. As a basis for this, you use an existing panoramic image. On the computer, just select the region in question and mark it with a small square. At the touch of a button, the device automatically moves to the correct position and is ready to acquire the CBCT image. The benefit for you: you create the image stress-free and right away in the region you are interested in. The benefit for your patient: A lower dose due to the limited area and also less stress when taking the image.

Two-directional Scout

After initial positioning is accomplished by the 3 positioning laser beams, 2-directional X-ray images can be taken to confirm that the position is accurate. If it is not, simply adjust the position of the image on the computer by placing the cursor at the center of the region of interest.

Direct Positioning with Laser Beams

Positioning laser beams set the patient’s position and align the region of interest manually. First, the patient’s initial position is set using the 3 laser beams. Then, 2 additional laser beams are aligned to the region of interest. The C-arm will automatically move to the right position.

Veraviewepocs 3D R100 offers a total of 6 exposure areas from 40 x 40 mm up to 100 x 80 mm for various diagnostic needs. The full arch scan captures the maxilla and/or the mandible with the equivalent of 100 mm in diameter and two height options of 50 or 80 mm. Its full arch capability, reduced dose, and exceptional clarity are ideal features for implant planning and oral surgery.

Six Fields of View:

The image layer for panoramic images can be adjusted after the exposure has been made to improve clarity and sharpness. This function makes it possible to improve the image range for areas with differing depths, as well as the surface. With this function, you are able to choose between single, double, or three-point adjustment.

The Veraviewepocs takes cephalometric images with high speed and ensures high quality images each and every time.

High speed
The Veraviewepocs system offers high speed performance requiring only 2.6 to 5.8 seconds for a lateral projection. The speed helps to ensure high quality images each and every time. For pediatric patients, the reduced scan time is especially helpful as repeat images due to patient movement are virtually eliminated.

Low Dose
With only a tenth of the dose compared to a conventional X-ray*, the exposure level is significantly reduced.

High Quality Image with Wide Dynamic Range
You obtain far more information about hard and soft tissue – with just a single acquisition.

Variable Imaging Processing
The variable image processing technique generates optimum grayscale values by varying scanning speeds for hard and soft tissue. With this technique, the entire exposure time is only 4.1 seconds. Without this feature, the processing time is 4.9 seconds.

Processing Time
On average, image processing is completed within just 20 seconds.

Cephalometric Programs

• posterior-anterior
• lateral

 * Comparison made to Veraviewepocs film-based system

Within the 100 mm diameter exposure range MORITA’s unique 3D system replaces the typical cylindrical shape with a convex triangle shape - the Reuleaux. The generated unique FOV encompasses the entire dental arch (with upper jaw and lower jaw) and simultaneously excludes all other areas of image acquisition, that are out of interest. The benefit of this MORITA-exclusive function: Imaging of the entire dental arch can be achieved with less X-ray dose.